The average cost of repairing a plumbing leak is about $600. The prices get even higher when it’s an industrial leak.
There are some maintenance costs that you can avoid by installing the right systems. Having a few additions like flanges in piping will help you save a lot of costs in the future.
If you have ever noticed a protruding rim on a pipeline, that was probably a flange. The protrusion increases the strength and helps distribute the load within the piping system.
Engineers love using them for joints because they can withstand high pressure. Here are basic things to know shout flanges in piping systems.
Slip-on Flanges
Slip-on flanges are common in piping systems because of their low initial cost. Their ease of installation also increases their popularity.
Their downside is that they need double welding to hold because they lack a neck. But slip-on-flanges come in a wide range of diameter sizes meaning you could use them anywhere.
Threaded Flanges
If you want to save up on the welding cost, it’s wise to pick threaded flanges. They have an internal thread that helps them attach to the piping system.
Their installation process is like that of slip-on flanges. However, you can only use threaded flanges in pipes with external threads.
Socket Weld Flange
The socket weld flange is ideal for small piping systems that need to withstand a lot of pressure. This flange has a bore on one side because industrialists use it on small pipelines. Check it out here and enjoy professional installation.
Socket weld flanges rejuvenate fluid flow because the bore on them is of equal size with the opening on the pipe. Therefore, there will be no changes in flow rates.
Weld Neck Flanges
When you’re working with pipes of varying diameters, it’s wise to use weld-neck flanges in your system.
There will be an increase in pressure in fluids moving from a pipe with a bigger diameter into a smaller pipe.
Weld neck flanges are installed to absorb the effects of the pressure change. Their attachment is through butt welding which allows them to distribute the load.
You can use them in any environment because they can handle extreme temperatures. Most engineers favor these flanges in piping systems because of their high stability.
Blind Flanges
In piping systems, it’s common to encounter flanged joints that need to be reopened now and then. It would be unwise to use permanent flanges like the weld neck joint.
Thus, engineers use blind flanges to close these ends. Instead of the conventional protruding ridge, blind flanges are flat metal plates.
Engineers design them without a bore so that they can withstand internal pressure. Blind flanges in piping system make the inspection a lot easier.
Flanges in Piping Systems
It’s advisable to use flanges in piping systems from the word go. This tactic will help you save a lot of maintenance costs in the future.
There are various types of flanges all with their unique purposes. Make sure to pick the most suitable one for your piping system.
Stay on this website for more insightful articles.
